DVB Dream 3.0 USALS not working properly

[waldmeister123]

I have tested DVB DReam 3.0 with my TBS6903 with BDA.dev and streamreader.dev (these are the only 2 available devices for my card) and the problem is with USALS.
I have setup USALS to use my posioner GT-D14MG. My southes Sat is 7°E and dish is setup correctly (DVB Dream 2.81, ProgDVD and EBSpro all working fine)

Using DVB DReam 2.81 (V48.48.51) API 3.1.0 I can drive to any sat position but with DVB Dream 3.0
I can´t get any sat that is more western than 7°E.

[rel]

that is weird, I'll check USALS code, but there was no changes.

[waldmeister123]

I have tried DVBDream 3.1 but still the same.
Here are my options:

I have also uploaded the logs: https://we.tl/ucKGxClk5X
Let me know if something is missing.

My equipment: TBS 6903 & GT-DM14MG positioner.

P***DVB 7.XX & EBSpro are working with any problems.

[rel]

I sent you a patched version in PM ,
can you check if it works better?

[bakerpreggie26]

I have tested DVB DReam 3.0 with my TBS6903 with BDA.dev and streamreader.dev (these are the only 2 available devices for my card) and the problem is with USALS.
I have setup USALS to use my posioner GT-D14MG. My southes Sat is 7°E and dish is setup correctly (DVB Dream 2.81, ProgDVD and EBSpro all working fine)

Using DVB DReam 2.81 (V48.48.51) API 3.1.0 I can drive to any sat position but with DVB Dream 3.0
I can´t get any sat that is more western than 7°E.

I can also concur that with my setup TBS card and USALS motor I can't drive beyond 7e also. Let me know if you would like me to post more details.

[rel]

Hi, I cannot reproduce the problem, II have tried on v3.1.1

So make sure your longitude and latitude values are set correctly on DVB Dream. (Maybe you enter the information vice-versa? )

Make sure you select motor type correctly ( Try by selecting "Stab H-H" motor type on DVB Dream positioner dialog)

Positioner code is exactly the same as v2.8.1 .

[bakerpreggie26]

Using Stab H -H done the trick!
Thanks

[waldmeister123]

Using Stab H -H done the trick!
Thanks

What discq motor and dvb-s card do you use?