AVer3D Satellite TV and DVB Dream

[Dm1try]

USB-tuner: AVer3D Satellite TV ( http://pctuner.ru/page-al-aver3d_sat.html ) ( eng )
Driver: v2.1.64.155 AVerMedia from 15.08.2011 ( url )
DVB Dream v1.6.
PC:
Intel Core i5-2500 3.3ГГц
ASRock H67M-GE
DIMM DDR3 16Гб PC10666 1333МГц k*ngston
SATA-3 2Тб Hitachi, SATA-2 1.5Тб WD
Sapphire AMD Radeon HD6670 1024Мб 128-бит GDDR5
Windows 7 Home Premium 64-бит

After run DVB Dream have message: "Ошибка инициализации DVB карты. Код ошибки: 14". (Failed to initialize DVB card. Error code: 14).

Please help. Need any information about work AVer3D Satellite TV with program DVB Dream.

[rel]

hi can you try the following patch ? It should fix the problem
copy the file into "\dvbdream\devices\" folder and overwrite.

please let me know / write the results after testing.

[Dm1try]

Thank you. Problem is solved. One satellite scanned (60E). Channels found, but not all. Picture and sound are. Now check settings...

[rel]

Thank you. Problem is solved. One satellite scanned (60E). Channels found, but not all. Picture and sound are. Now check settings...

Good ,
Do you use Diseqc switch ? if yes, please test / confirm it works fine.

[Dm1try]

I use Diseqc motor SG-2100A Moteck in USALS mode. Now motor not work. I still test different settings. From progdvb motor work in USALS.

PS: Also I still have problems with switching of transponders.

[cometofuture]

I have AVer3D Satellite TV R889

Site: http://www.avermedia.com/Product/Produc ... b=APDriver

I tested Aver3D R 889 in dvbdream 1.7a it works but there is a problem with the Diescqe.It only recognize one moon.I have Nilesat and Hotbird when I scan hotbird it give me the same channels in Nilsat.Also Another problem it doesn't see all transporters. I need a good device for my Aver3D please.

Note: I have tested dvbdream 1.7a in a different satellite card which is Tevii s660 it works well for all moons in the diesqc.This is why I'am sure that the problem is with the DBA device.