Channels disappear

[outlander]

hello there,

I have this problem that's been shown by the picture below



no channel is been appearing for a couple of days now

hope to get an answer ASAP

thanks in advance

[rel]

your channel list file "chllist.chl" probably got corrupted.
Try to add satellites again in diseqc menu if they are not there.
If still channels don't show up after this, you need to scan again.
use the latest version v1.6

[poppo]

actually your satelite filter got set to nonexistent satelite 0.0E
click on the satelite selection field 0.0E and change it to the correct one or all this shoud fix your problem
Btw channel list is ok its just this filter

I had the same problem after swichin to 1.6

[rel]

moving to topic to undetermined, since user not replied
most likely diseqc satellite configuration or channel list filter options are the culprit

[outlander]

thanks poppo for the solution

I change it from 0.0 to 7.0

have a look at the picture

[img]http://i1096.photobucket.com/albums/g32 ... ilesat.png[/img]

[poppo]

good that I could help btw this problem is occuring some times when DD is closed forcefully ie powerloss or DD hangs and is closed whith task manager
This issue is very rare.
Sometimes You can get a problem starting DD (most often after crash or low disk space situation)
if this occurs check Settings.cfg i got this file sometimes reduced in size to 0 bytes and the solution was to delete it and configure DD again