DVBWORLD DVBS2 NO SIGNAL

Fixed bugs & the feature requests that have been implemented. Section is just to inform users during version changes.

Moderators:X05, Dreamer, FredB

erbipjr
Not too shy to talk
Posts:14
Joined:Sun Jun 08, 2008 11:38 am
DVBWORLD DVBS2 NO SIGNAL

Postby erbipjr » Fri Jun 27, 2008 3:44 am

I have post it once. I am opening a new one, especific for DVBWORLD S2 cards. I have noticed that DD does not work in DVBS2 mode with these cards. With official software I can tune S2 channels.
I have sent an email to DVBWORLD's support and got this answer:
From: "support" <support@worlddvb.com>
To: "Elber"
   "can u ask the DVBDream author , we have send our samples to him!!" DVBWorld Technology Co,.LTDBest RegardsPeter
So I would like to know if DD will suppport these cards in S2 mode (DVBS works !) ?
When trying to tune S2 channels, there is no signal level. Maybe I am missing something, but have asked here and no answers.I have high signal level using official software.
Thanks in advance for any help.
🌟 Recommended Tools & Services
DVBWORLD USB 2104
starman
Just can't stay away
Posts:43
Joined:Sun Mar 25, 2007 10:08 am
Location:Canada

Postby starman » Fri Jun 27, 2008 12:48 pm

I'm curious about this also. I have both the 2004pci and 2104 usb versions, neither will tune -s2 channels in DD.
90cm ku, sg-2100, qph-031 lnbf
10' C/Ku
Prof 7301
TBS 8922
TBS 6925
Windows 8 64 bit
erbipjr
Not too shy to talk
Posts:14
Joined:Sun Jun 08, 2008 11:38 am

DVBWORLD DVBS2 NO SIGNAL

Postby erbipjr » Sat Jun 28, 2008 4:16 am

I have tried ALTDVB and no signal on S2 channels too. With Progdvb Pro it is possible to tune these channels. So, to see S2 HD channels you have two options: Progdvb Pro and factory software. Mytheatre fails two, maybe because it does not have H264 support.
DVBWORLD USB 2104
erbipjr
Not too shy to talk
Posts:14
Joined:Sun Jun 08, 2008 11:38 am

Postby erbipjr » Sat Jun 28, 2008 4:19 am

Hi starman. Which software you are using to see S2 HD channels ? My best results are using Coreavc H264 and Progdvb Pro.
DVBWORLD USB 2104
starman
Just can't stay away
Posts:43
Joined:Sun Mar 25, 2007 10:08 am
Location:Canada

Postby starman » Sat Jun 28, 2008 8:18 am

I"ve been using Progdvb Pro and the Dvbworld software. Coreavc seems to work pretty well.
90cm ku, sg-2100, qph-031 lnbf
10' C/Ku
Prof 7301
TBS 8922
TBS 6925
Windows 8 64 bit
erbipjr
Not too shy to talk
Posts:14
Joined:Sun Jun 08, 2008 11:38 am

DVBWORLD DVB-S2 NO SIGNAL

Postby erbipjr » Mon Jul 07, 2008 9:47 am

Updating: DVBWorld USB DVBS2 2104 working with Progdvb PRO, DVBviewer and official software (both in DVBS2 mode).
In DVB-S mode, same apllications above plus DVBDream and Mytheatre.
DVBViewer is the only one capable of decoding AAC audio. (brazilian HD/H264 channels - AAC audio).
DVBWORLD USB 2104
erbipjr
Not too shy to talk
Posts:14
Joined:Sun Jun 08, 2008 11:38 am

DVBWORLD DVBS2 NO SIGNAL

Postby erbipjr » Thu Jul 10, 2008 9:25 am

During this week I am reading posts about DVBS2 tunning problems. Some other card's models have the same problem: no dvb-s2 signal.
So, it is not DVBWorld's fault. It is a very good card. I am using it with no problem with DVBViewer.
DVBWORLD USB 2104
glazok28
Just popping in
Posts:3
Joined:Mon Dec 22, 2008 5:14 pm

Postby glazok28 » Fri Dec 26, 2008 3:34 am

Is there any changes regards tuning DVB-S2 channels with DVBDream? Having latest drivers from USB 2104 card manufacturer, (24.12.2008)howerer still no signal tunning. DVBS channels work fine, as always.
DVBWorld USB 2104 (DreamSat USB-220) / DVB-S2 support / Windows XP / Eutelsat W4 / Circular single LNB w/o Diseqc
Poune
Just popping in
Posts:5
Joined:Mon Feb 09, 2009 5:12 am

Same for FireDTV/FloppyDTV

Postby Poune » Fri Feb 27, 2009 9:31 am

Hi,

I have the same problem with a FloppyDTV, no signal for DVB-S2 transponders ... HD channels on DVB-S transponders work in DD but it's not very stable (CPU +/- 60%), I have lot's of crashes ...

The drivers of the FloppyDTV : BDA
DVB card : FloppyDTV S2 (BDA)
MB : Asus M2AVM-HDMI
VIDEO : ATI Radeon X1250
CPU : AMD Athlon 64 X2 4600+
RAM : 2GB (Dual)
OS : XP Pro

Dish : WaveFrontier T90 / LNB's : 4 Titanium Quad 0.2 dB + 4 Titanium Twin 0.2 dB (28.5°E, 28.2°E, 23.5°E, 19.2°E, 13.0°E, 7.0°E, 4.8°E, 1.0°W, 5.0°W) / DiSEqC's : 4 Spaun 411 WSG + 2 Spaun SUR 420 F
User avatar
rel
relocation
Posts:2051
Joined:Fri Jun 16, 2006 9:50 am

Postby rel » Sat Jun 13, 2009 8:55 am

you can download the latest BDA device interface update from the forum
or wait for next version (fixed in v1.5)
DVB Dream - because I have to dream about having time to code it

Return to “Done”

Who is online

Users browsing this forum: Google Adsense [Bot] and 1 guest