Page 1 of 1

Technisat SkyStar USB 2 HD CI and DVB Dream

Posted: Fri Jun 10, 2011 3:27 am
by pupido
I wanted to know if Technisat SkyStar USB 2 HD CI working with DVB Dream.
In fact, DVB Dream crashes all the time and I can never close this application.
What can I do to fix this problem?
Thanks,

Mario

P.S.: excuse my english but I speak only Italian

Posted: Fri Jun 10, 2011 8:17 am
by rel
you can send your dvbdream.log file and a screenshot if the crash is with an error message.
I would simply say install a new setup to another folder.
It should work with all BDA cards. SkyStar USB 2 HD CI is also a BDA device. but not tested by us.


Please write again if your problem continues

maybe there is a bug, if you tried different codecs and still have the problem. other users should confirm here in that case.

Posted: Fri Jun 10, 2011 5:19 pm
by pupido
you can send your dvbdream.log file and a screenshot if the crash is with an error message.
I would simply say install a new setup to another folder.
It should work with all BDA cards. SkyStar USB 2 HD CI is also a BDA device. but not tested by us.


Please write again if your problem continues

maybe there is a bug, if you tried different codecs and still have the problem. other users should confirm here in that case.
Can you explain me please do install a new setup to another folder?

Posted: Sun Jun 12, 2011 6:25 am
by Dreamer
Just start a new installation, run the install file and change the install path, e.g.: instead of \DVB Dream use "\DVB Dream clean".

Posted: Fri Jul 15, 2011 12:40 pm
by ozzymanborn
I tried trial version of your program and device not started on that > bda.log is above...

[07/15/11 22:31:55 : ] >> DeviceGetList
[07/15/11 22:31:55 : ] - Filter [TechniSat UDST7000BDA DVBS Tuner0]
[07/15/11 22:31:55 : ] << DeviceGetList pDL->Count:1
[07/15/11 22:31:55 : ] StartDevice() dwDeviceNo:0
[07/15/11 22:31:55 : ] >> DeviceGetList
[07/15/11 22:31:55 : ] - Filter [TechniSat UDST7000BDA DVBS Tuner0]
[07/15/11 22:31:55 : ] << DeviceGetList pDL->Count:1
[07/15/11 22:31:55 : 16] BDA Device Name: [TechniSat UDST7000BDA DVBS Tuner0] (Tuner Type:1)
[07/15/11 22:31:55 : 16] add_filter (TechniSat UDST7000BDA DVBS Tuner0)
[07/15/11 22:31:55 : 31] add_filter (Microsoft DVBS Network Provider)
[07/15/11 22:31:55 : 47] TuningSpace Name: 'Antenna' NetworkType: {00000000-0000-0000-0000-000000000000}
[07/15/11 22:31:55 : 47] TuningSpace Name: 'ATSC' NetworkType: {0DAD2FDD-5FD7-11D3-8F50-00C04F7971E2}
[07/15/11 22:31:55 : 47] TuningSpace Name: 'ATSCCable' NetworkType: {0DAD2FDD-5FD7-11D3-8F50-00C04F7971E2}
[07/15/11 22:31:55 : 47] TuningSpace Name: 'AuxIn1' NetworkType: {00000000-0000-0000-0000-000000000000}
[07/15/11 22:31:55 : 47] TuningSpace Name: 'Cable' NetworkType: {00000000-0000-0000-0000-000000000000}
[07/15/11 22:31:55 : 47] TuningSpace Name: 'ClearQAM' NetworkType: {143827AB-F77B-498D-81CA-5A007AEC28BF}
[07/15/11 22:31:55 : 47] TuningSpace Name: 'DD2 DVB-S' NetworkType: {FA4B375A-45B4-4D45-8440-263957B11623}
[07/15/11 22:31:55 : 47] Enumeration found 7 tuning spaces
[07/15/11 22:31:55 : 47] Found TuningSpace
[07/15/11 22:31:55 : 47] ---------------------------------------------
[07/15/11 22:31:55 : 47] BDACardType: 7
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Pin types (2) :
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Pin 0 Type = Input
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Pin 1 Type = Output
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Node types (2):
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Node 0 Type = 0
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Node 1 Type = 1
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Node interfaces:
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Interfaces on NodeType 0 (5 interfaces):
[07/15/11 22:31:55 : 47] GetTunerInterfaces: {992CF102-49F9-4719-A664-C4F23E2408F4} IID_IBDA_LNBInfo
[07/15/11 22:31:55 : 47] GetTunerInterfaces: {71985F47-1CA1-11D3-9CC8-00C04F7971E0} IID_IBDA_FrequencyFilter
[07/15/11 22:31:55 : 47] GetTunerInterfaces: {1347D106-CF3A-428A-A5CB-AC0D9A2A4338} IID_IBDA_SignalStatistics
[07/15/11 22:31:55 : 47] GetTunerInterfaces: {F84E2AB0-3C6B-45E3-A0FC-8669D4B81F11} Unknown Interface
[07/15/11 22:31:55 : 47] GetTunerInterfaces: {E5644CC4-17A1-4EED-BD90-74FDA1D65423} Unknown Interface - QueryInterface FAILED ! - hr = 0x80004002
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Interfaces on NodeType 1 (2 interfaces):
[07/15/11 22:31:55 : 47] GetTunerInterfaces: {EF30F379-985B-4D10-B640-A79D5E04E1E0} IID_IBDA_DigitalDemodulator
[07/15/11 22:31:55 : 47] GetTunerInterfaces: {1347D106-CF3A-428A-A5CB-AC0D9A2A4338} IID_IBDA_SignalStatistics
[07/15/11 22:31:55 : 62] add_filter (TechniSat UDST7000BDA DVBS capture0)
[07/15/11 22:31:55 : 62] SUCCEEDED: Propertyset interface found!
[07/15/11 22:31:55 : 62] add_filter (Sample Grabber)
[07/15/11 22:31:55 : 62] add_filter (MPEG-2 Demultiplexer)
[07/15/11 22:31:55 : 62] add_filter (BDA MPEG0 Transport Information Filter)
[07/15/11 22:31:55 : 78] FAILED: cannot connect ms mpeg-2 demultiplexer filter to transport information filter
[07/15/11 22:31:55 : 78] FAILED: THBDA_IOCTL_STOP_REMOTE_CONTROL failed!
[07/15/11 22:31:55 : 78] BDACleanUp() completed.

And dvbdream.log
15.07.2011 22:31:23 : 359] Captains Log: Star Date 15.07.2011 22:31:23
[15.07.2011 22:31:23 : 359] --------------------------------------------------------
[15.07.2011 22:31:23 : 359] Program started. DvbDream v1.5.6.0
[15.07.2011 22:31:23 : 359] [USER ] ""
[15.07.2011 22:31:23 : 359] [LANG ] english.ini
[15.07.2011 22:31:23 : 359] [DEV ]
[15.07.2011 22:31:23 : 359] [STATS] CHANNELS : Chs:0 FavChs:0 RmtChs:0
[15.07.2011 22:31:23 : 359] [STATS] USAGE : Launchs:0 Usage: 0:0
[15.07.2011 22:31:23 : 359] [STATS] SATS : Sats:0 ()
[15.07.2011 22:31:23 : 359] [SINCE] 1.5.6.0
[15.07.2011 22:31:27 : 4274] [TimeProfiler] Initializing DVB Device: 0 ms
[15.07.2011 22:31:27 : 4274] Loading device:bda.dev
[15.07.2011 22:31:27 : 4383] (ERROR) Cannot Initialize DVB Hardware! Error-Code:14

Posted: Thu Aug 25, 2011 8:58 am
by nablalap
Version 1.5f has not resolved problems with Skystar Usb 2 HD CI

The bda Device 2.5.8 don't work still well.
Scanning hotbird doesn't find all channels, for example Rai Premium and Rai Storia (Transponder 11804Mhz V 27500 2/3 QPSK).

Console CI/CAM still not take card.

Perhaps could be useful and interesting to insert in DDSDK the project Visual C to compile BDA Devices by yourself.