when I run dvbdream I got an error says:
" can not create Video- decoder filter. Suggestion: Change video codec "
what is the problem ? do you have any solution for this error?
" can not create Video- decoder filter" Error
Moderators:X05, Dreamer, FredB
-
DavidSmith6310
- Posts:1
- Joined:Mon Dec 11, 2006 2:27 am
You should try to select other codecs in Video Settings (CTRL + G)
If none appears, so you should install MPEG2 codecs to your PC. As mention on the official page of DVBDream, Intervideo WinDVD is recommended (but other codecs as nVidia PureVideo, Cyberlink PowerDVD, etc... works fine)
If none appears, so you should install MPEG2 codecs to your PC. As mention on the official page of DVBDream, Intervideo WinDVD is recommended (but other codecs as nVidia PureVideo, Cyberlink PowerDVD, etc... works fine)
Forum PCTVSat : http://pctvsat.free.fr
-----------------------------------------------------------------------
Pinnacle PCTV Sat + Terratec Cinergy 1200 DVB-S / Athlon 64 3500+ - 2048 Mb DDR - GeForce 7900 GS
Twinhan Vision Plus 1030A + Asus Europa II Hybrid / PIV D920 2x2.8 Ghz - 2048 Mb DDR2 - GeForce 7600 GS
PCTV Sat Pro PCI (PCTV 450i) + DVICO Fusion HDTV USB / Athlon XP 3200+ - 1024 Mb DDR - GeForce 6600GT
-----------------------------------------------------------------------
Collective installation with 2 LNB Quad and multiswitches DiseqC - LNB A = Astra 19.2°E - LNB B = Hotbird 13.0°E - Commutation = 13V/18V/22K + DiseqC 2.0
-----------------------------------------------------------------------
Pinnacle PCTV Sat + Terratec Cinergy 1200 DVB-S / Athlon 64 3500+ - 2048 Mb DDR - GeForce 7900 GS
Twinhan Vision Plus 1030A + Asus Europa II Hybrid / PIV D920 2x2.8 Ghz - 2048 Mb DDR2 - GeForce 7600 GS
PCTV Sat Pro PCI (PCTV 450i) + DVICO Fusion HDTV USB / Athlon XP 3200+ - 1024 Mb DDR - GeForce 6600GT
-----------------------------------------------------------------------
Collective installation with 2 LNB Quad and multiswitches DiseqC - LNB A = Astra 19.2°E - LNB B = Hotbird 13.0°E - Commutation = 13V/18V/22K + DiseqC 2.0
If its after first install of DVBDream, you have to check that you have installed mpg2 decoder and chose it in video settings.
Or if its problem after some time of using DVBDream... i know that isue.
After some time of using DVBDreams (sometimes few weeks, sometimes few months) that msg appears and i cant use old decoder and have to change to other.
Or if its problem after some time of using DVBDream... i know that isue.
After some time of using DVBDreams (sometimes few weeks, sometimes few months) that msg appears and i cant use old decoder and have to change to other.
- Twinhan VisionDTV 1022a DVB-S / Athlon 64 2800+ - 1024 Mb DDR - GeForce 7600 GS (PCIE) / WinXP Home SP2
- Twinhan VisionDTV 1022a DVB-S / Sempron 2800+ - 512 Mb DDR - Integrated SIS Graphics Card / WinXP Home SP2
- EasyTouch Columbia 1022a DVB-S / Athlon 1400 - 512 Mb DDR - Radeon 9550 AGP / WinXP Home SP2
It looks like some trial version of codec - Elecard??Or if its problem after some time of using DVBDream... i know that isue.
After some time of using DVBDreams (sometimes few weeks, sometimes few months) that msg appears and i cant use old decoder and have to change to other.
Not a bug IMO, moved to General.
Dreamer
After Renderer change i was working again .. but after some time there was no any working renderer . and i changed to another Codec.
- Twinhan VisionDTV 1022a DVB-S / Athlon 64 2800+ - 1024 Mb DDR - GeForce 7600 GS (PCIE) / WinXP Home SP2
- Twinhan VisionDTV 1022a DVB-S / Sempron 2800+ - 512 Mb DDR - Integrated SIS Graphics Card / WinXP Home SP2
- EasyTouch Columbia 1022a DVB-S / Athlon 1400 - 512 Mb DDR - Radeon 9550 AGP / WinXP Home SP2
Who is online
Users browsing this forum: No registered users and 1 guest