Page 1 of 1
TwinHAN WDM Drivers
Posted: Sat Jan 05, 2008 11:55 am
by oscarr
I was on
www.twinhan.com ... and i seen that there is no WDM drivers to download.
DBA drivers are not so stable with 1020/1022 cards (never tested others).
I think that TH users schould try WDM Driver. DDream on Twinhan with WDM works much faster and better.
Posted: Tue Jan 08, 2008 4:51 am
by saentist
They have another site
www.twinhandtv.com
there is and driver
DVB-TV V2.432.zip
!!! file is broken need rapair
Posted: Thu Jan 10, 2008 5:24 am
by Baseline
Forgive me for being a bit of a newbie, but how does one go about replacing their old BDA drivers with these? It's a .ini and two .sys files in this zip.
Posted: Wed Mar 19, 2008 10:28 am
by freddy3
To install new drivers go to my computer and right click properites .Under device manager open and find dtv audio and video device. Update the driver to where you have the new one located. Do this for both audio and video.
________
WEED VAPORIZERS
is it working with wdm driver
Posted: Sat Mar 29, 2008 11:18 pm
by chattana
Could anybody confirm twinhan card works well with WDM driver within DD when switching diseqc? thanks
Confirmed Twinhan 1020a with WDM driver and Diseqc switch
Posted: Sun Mar 30, 2008 9:51 pm
by fktoss
I can confirmed that my Twinhan 1020a (Visionplus) and WDM drivers is switching just fine using a heavy duty Chieta 4x1 switch with 4 sat feeds. You have to have direct cable from the 4x1 switch to your 1020a, NOT using a loop out of any STB box, otherwise it won't works.