DvbDream Community

Posted: **Sun Oct 21, 2007 6:06 pm**

Here in New Zealand we use the new Optus D1 at 160.0 for our free to air channels. This satellite has not been added to DvbDream. What is the easiest way to add the settings for this satellite?

See http://www.lyngsat.com/optusd1.html for information.

regards

Paul

Posted: **Sun Oct 21, 2007 10:06 pm**

Create an INI file and put it into \transponders folder of DVBDream, save the file as "1600.ini"

syntax is very simple, so just take a look at existing INI files first.

Posted: **Thu Oct 25, 2007 12:33 am**

Thanks. I generated an ini file. It looks OK but DD Dream is not reading it ( i.e. can choose the new satellite - but no transponder choices come up) i suspect the problem is that i edited using Wordpad, and there is some unwanted formatting saved. Any suggestions on how to turn it into plan text?

Paul

Posted: **Thu Oct 25, 2007 3:12 am**

copy paste into notepad and save it as 1600.ini

make sure you have the correct "number of transponders" information in the ini file

[SATTYPE]
1=0192
2=Astra 1A-H, 2C

[DVB]
0=76
1=10773,H,22000
2=10788,V,22000
3=10817,V,22000
4=10832,H,22000
..
..
..
76=12728,V,22000

DvbDream Community

Adding new satellite

Adding new satellite

So good so far