DvbDream Community

Posted: **Fri Jul 20, 2007 3:58 pm**

Probably a noob question, but has anyone had any luck with a D* Pro P*us (LNB receiving 129, 119, 110) w/DVDDream? I can only lock on 119 w/my skywalker.
settings:
DP DBS KU HI
Raw commands: E0 11 38 F0, F4, F8
22hz off
uncommitted disabled

I lock onto 119 no sweat, but can't lock onto 110 or 129...no signal.
Thanks in advance!

Posted: **Sat Jul 21, 2007 10:06 pm**

Anyone?

Posted: **Wed Jul 25, 2007 10:57 am**

For those of you that care...I pony'd up for a DPP44 and bingo, all 3 birds should up. I set the Diseqc to v1.0/v2.0 placed each bird on the appropiate DPP44 port and it worked.

Posted: **Fri Jul 27, 2007 7:10 am**

Thanks for this information, it should be useful for other users of DD that have the same configuration

Posted: **Thu Aug 02, 2007 10:21 am**

I got mine working no problem without any external switches. Just make sure you have your ports right. The sky walker one is 750ma so power is not an issue. port 1 119, port 2 110, port 3 129......set all lnbs to na bandstacked DP ku-Hi (DBS). 22khz to off. Be aware that there aren't many in the clear(FTA) Channels on these birds. Im not sure were else you could point them

DvbDream Community

1000.2 Settings

1000.2 Settings