Supported Devices(User confirmations,pls add your card here)

[tic]

Test Environment: DVB Dream v1.7d (upcoming version), TechniSat BDA driver version 1.1.1.502 (02.07.2009), Windows 7 Ultimate 64bit, by Rel, 28.04.2012
Manufacturer: Technisat
Model: Technisat SkyStar HD2
Type: PCI, Satellite
Supports DVB-S2: Yes (tested OK with both NBC-QPSK and 8PSK)
Diseqc switch works?: Yes
Diseqc motor/raw diseqc works?: Yes (not tested but pretty sure it should work since raw commands are supported)
RC works?: works in Twinhan mode (tested by Dreamer)
CI works?: No (It doesn't provide any friendly and working SDK/examples to implement this, if you think you can implement we'll share the device interface's source code with you)
Notes: Device works well without any problems (except that CAM doesn't work)

Hi! maybe this can help you partially for ci interface.

This media center is open source.And support partially the skystar HD2 ci.(it decripts the channels,but not navigate in the menu of ci).

http://wiki.team-mediaportal.com/1_MEDI ... kystar+hd2

http://wiki.team-mediaportal.com/1_MEDI ... _%28GIT%29

Maybe the source code of media portal,can help you to understand how ci modules work.

A greeting.

[ScanMan]

Test Environment: DVB Dream v2.2b p1, BDA 3.0.18 / Api 3.10, Windows 7 Ultimate 32t
Manufacturer: Technotrend
Model: S-3200 with CI - Driver Version: 5.0.1.8 / 16 Jan. 2009
Type: PCI, Satellite
Supports DVB-S2: Yes
Diseqc switch works?: Not testable yet, will come up again soon !
Diseqc motor/raw diseqc works?: Not testable yet, will come up again soon !
RC works?: Not testable
CI works?: NO !! - Used CAM: UNICAM V1 / Sparta 5.40, SmartCard: HD+
Notes: Device works well without any problems

Hi folks - back again !

Tried out the latest version. CAM/CI doesn't seam to work as in further Versions. Nos response, no menue.
Tested my own TT-API an an ext. standalone App. -> CAM and Card ist working - also in combination with e.g. DD 1.5c !
Noticed that you also use the TT-API - Version 1.0.1.15 ?!
Changed that file to a one of my versions: 1.0.1.11 -> Hey - what's that: Everything's bright ! HD+ is working well on all channels !
Tested API V 1.0.1.21: NoGo ! DD crashed. (I have same probs sometimes with that version ....)

Hope this information was usefull.
Adeqaute TT-API is attached. (Please korrekt the name before using)

[ScanMan]

So there seems another little prob:

I accidentily renamed all my ttBdaDrvApi_Dll.dll with an extra extension to change between different versions.
Suddenly.....
DD starts completly, but nothing happens. You can click through a lot of channels - no signal everywhere.
No error, no crash, nothing - everthing seems to be normal !

Problem solved so far:
I have no valid ttBdaDrvApi_Dll.dll ! Rename e.g. the 1.0.1.11 to orignial name will do it.

This could very confusing, if someone like me does something tricky or file ist lost.
Should be checked while startup.
Also false/invalid DLL-versions like 1.0.2.1 !

[miroslav.milanovic]

Test Environment: DVB Dream v2.8.1, BDA driver version 48.48.51, Windows 10 Pro x64
Manufacturer: Prof Revolution
Model: Prof-8000
Type: PCI-E, Satellite
Supports DVB-S2: Yes
Diseqc switch works?: Yes
Diseqc motor/raw diseqc works?: Yes
RC works?: Yes
CI works?: -
Notes: Device works like a charm

[un malato di cuore]

Test Environment: DVB Dream version, Driver version, Windows OS Version, Your Nickname or Name, Test Date
Manufacturer: company name
Model: model name / number
Type: device type (USB/PCI/PCI-Express) , tuner type (Satellite/Terrestrial/Cable)
Supports DVB-S2/T2/C2: Yes/No/No hardware support (if the card supports new modulations, i.e. 8psk, you can add also short info here)
Diseqc switch works?: Yes/No/No hardware support (and short info , if partially supported)
Diseqc motor/raw diseqc works?: Yes/No/No hardware support (this is in fact the raw diseqc support, only if you have motor/positioner or a raw diseqc device to test with please add this line, please also specify which raw diseqc device you use, i.e. motor or switch model&type)
RC works?: Yes/No/No hardware support (remote control works or not?)
CI works?: Yes/No/No hardware support (add this line if only your device hardware supports CI/CAMs)
Notes: Description of your experience with this card on DD

hi, my test is the follow:
Dvb Dream 3.2.1
driver ??? do you mean card driver ???
if yes, the driver is: 2.0.0.1
Windows 10 Pro
nick: un malato di cuore
test date: today
manufactures: TBS
model: 6209 (octa-tuner)
device type: pci-express
tuner type: terrestrial
support T2
no diseqc because my card is terrestrial (DVB-T, T2)
no remote control (i have delete it in the setup)
no CI support
notes:
this card has 8 tuners, so i can watch or record many and many channels.
the main problem i have seen using DD is that when i have finish to scheduler,
when the records start, the channels stay black.
i cannot watch or hear audio, but the record go on.
i have also lost records, maybe because i have turn off DD
or maybe because 2 programs start at the same hour,
example: channel1 start 21.00, channel 2 start 21.00

the good thing is that the program don't has never crash,
also if i have lost records.

thank.

[Dreamer]

Test Environment: DVB Dream v3.7.1, REALTEK DTV USB, DVB-T/T2/(C?), Windows 10 Home 64-bit 1809, by Dreamer, 2019-11-10

Manufacturer: REALTEK
Model: REALTEK DTV USB DVB-T/T2/C (REALTEK 2832U Filter)
Type: USB, Terrestrial, (Cable?)
Supports DVB-T/T2/C: Yes, ?, ?
RC works?: NO
Notes: Device works well - DVB-T tuner. Remote control doesn't work in DD. DVB-T2 and DVB-C not tested yet (no channels to test). Driver installation is quick and easy. Tuner works well together with the AVerTV Ultra PCI-E RDS in the same PC. Multi-recording, PIP and scheduler work well too. Timeshift is not stable (but it's the same with other tuners too).

EDIT:

Test Environment: DVB Dream v3.7.1, REALTEK DTV USB, DVB-T/T2/(C?), Windows 10 Home 64-bit 1909, by Dreamer, 2019-11-10

Device did not work with the original driver from CD after updating Windows 10 from 1809 to 1909. After uninstalling device in Device Manager and selecting "Scan for hardware changes" Windows installed the driver automatically and the tuner works good.